FIAT Grande Punto Actual - Manual (Page 32)

31
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
SER
VICE
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
CONTROLS AND DEVICES
fig. 21 F0M0124m
TRIP control button fig. 21
The TRIP button located on the top of
the right steering column stalk is used
(with ignition at MAR) to display and re-
set the previously described values to start
a new journey:
– press briefly to display the different
values;
– hold down to reset and then start a new
journey.
New journey
The new journey begins after:
– “manual” resetting by the user, by press-
ing the relevant button;
– “automatic” resetting, when the distance
travelled reaches 3,999.9 km or 9,999.9 km
(depending on the type of display) or when
the travel time reaches 99.59 (99 hours
and 59 minutes);
– disconnection/reconnection of the
battery.
IMPORTANT The reset operation when
“Trip A” details are being displayed resets
only the information associated with this
function.
IMPORTANT The reset operation when
“Trip B” details are being displayed resets
only the information associated with this
function.
Start trip procedure
With ignition at MAR, press and hold the
TRIP button for over 2 seconds to reset.
Trip Exit
To quit the Trip function: keep MENU
ESC pressed for over 2 seconds.
001-032 ACTUAL 2ed EN.qxd 30-04-2010 12:33 Pagina 31