Window washing – FIAT Grande Punto Actual User Manual

Page 50

Advertising
background image

49

SAFETY

ST

AR

TING

AND DRIVING

W

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

SER

VICE

AND CARE

TECHNICAL

SPECIFICA

TIONS

INDEX

CONTROLS AND DEVICES

WINDOW WASHING

The right stalk fig. 41 controls windscreen
wiper/washer and rear window wiper/
washer operation.

WINDSCREEN WASHER/WIPER

This can work only when the key is turned
to MAR.

The twist switch on the right stalk can be
moved to four different positions:

O

windscreen wiper off;

≤ intermittent operation;
≥ continuous slow operation;
¥ continuous fast operation.
Move the stalk to position A (temporary)
to limit operation to the time for which
the stalk is held in this position. When re-
leased, the stalk returns to its default po-
sition, automatically stopping the wiper.

Do not use the windscreen
wiper to remove layers of
snow or ice from the wind-
screen. In such conditions, the

windscreen wipers may be subjected to
excessive stress, prompting interven-
tion from the motor protection which
prevents operation for a few seconds.
If operation is not restored, even after
turning the key and restarting the en-
gine, go to a Fiat Dealership.

With the twist switch in position

≤, the

windscreen wiper will automatically adapt
to the speed of the car.

IMPORTANT Replace the wiper blades as
specified in the “Car maintenance” sec-
tion.

fig. 41

F0M0062m

“Smart washing” function

Pull the stalk towards the steering wheel
(temporary position) to operate the wind-
screen washer.

Keeping the stalk pulled for more than half
a second, with just one movement it is
possible to operate the washer jet and the
wiper at the same time.

The wiper stops working three strokes af-
ter releasing the stalk.

A further stroke 6 seconds later com-
pletes the wiping operation.

033-071 ACTUAL 2ed EN 30-04-2010 12:36 Pagina 49

Advertising