ACU-RITE VRO 300M - Manual (Page 17)

Readout Operations VRO 300M
10
6
ABS
INCR
ABS
. 2 5
TOOL RUN
Setting Absolute Zero with a Tool
1.
Touch the tool to the edge of the workpiece.
2.
Make sure the absolute position is displayed.
3.
Press the zero key for the appropriate axis.
4.
Enter the position of the tool center.
Setting Absolute Zero Using a Tool Offset
1.
Enter the tool’s diameter.
(Refer to page 18 for more
information about using tool
offsets.)
2.
Make sure the absolute position is displayed.
3.
Identify the appropriate edge of the tool.
4.
Touch the tool to the edge of the workpiece and zero the
appropriate axis.
ZERO
+/- . 2 5
ENTER
1
-0.125
0.25 DIA
ZERO ZERO
Shortcut
ZERO ENTER
ABS
INCR
ABS