Bolt circles, You can program full or partial circle patterns. h, Enter the number of holes. c – ACU-RITE VRO 300M User Manual
Page 34: Enter the center of the pattern. r, Enter the radius of the pattern. a, Blank if you want a full circle
Advertising
VRO 300M
Program Operations
27
Bolt Circles
You can program full or partial circle patterns.
H
OLES
—enter the number of holes.
C
ENTER
—enter the center of the pattern.
R
ADIUS
—enter the radius of the pattern.
A
NGLES
—you can rotate the first hole of the
pattern by filling in the start angle. You can
also do partial circles: the number of holes
you entered will be spaced evenly between the
angles. Leave the
END ANGLE
blank if you want
a full circle.
BOLT CIRCLE
DEPTH
Z
ABS
HOLES
ANGLES
0.000
START
END
CENTER
X
Y
ABS
ABS
RADIUS
X
Full Circle
X
Start
Angle
Rotated Circle
X
Start
Angle
End
Angle
Partial Circle
Advertising
This manual is related to the following products: