ACU-RITE VRO 300M - Manual (Page 63)

Setup VRO 300M
56
Parallel Port
Most printers connect to the parallel port. You can experiment with these
settings to format the printed output.
F
UNCTION
—select OFF to disable the port or
PRINTER to enable it for printing.
O
UTPUT
T
AIL
—enter the number (0 to 9) of blank
lines after each printed output.
LF A
FTER
CR—select to send a line feed character
after the CR (end of line); some printers need
this.
Protection
You have the ability to prevent changes to part
programs and to the tool library without first
entering into the
INSTALLATON SETUP
and
removing the protection.
With program protection set to YES, programs
cannot be changed or saved. This prevents an
inexperienced machine operator from making
scrap parts by mistakenly changing or deleting
a step.
If you protect the tool library, it can’t be mistakenly changed either.
PARALLEL PORT
PORT CONFIGURATION
FUNCTION
OUTPUT TAIL
PRINTER
0
LF AFTER CR NO
PROGRAM
NO
PROTECTION
TOOL LIBRARY
YES