Program operations – ACU-RITE VRO 300M User Manual
Page 26
VRO 300M
Program Operations
19
Program Operations
A program is a list of tool changes and position presets that you can save for
later use.
Creating a Program
Press the
PGM
key to view the program screen.
You create a program by entering a list of the steps in the order you want to
do them. As you add to your list, each step will be drawn immediately on the
screen so you can see a picture of your part in progress.
•
To create a new step, press the desired milling function key. Enter the
information describing the step into the form, and press the
USE
softkey to accept the data. This updates the program and moves down for
the next step.
•
To change a step, use the arrow keys to move to the step, and press
USE
or
ENTER
. When you have made your changes, press the
USE
softkey to accept the changed step back into the program.
•
To delete a step, move to the step and press the
CLEAR
key.
•
To insert a step, move to where you want the new step to go and press the
desired milling function key. The new step is inserted and the following
steps will move down.
If you decide not to use a step that you have already selected, press the
CANCEL
softkey.
Program
Name
Program
Steps
Part graphic