ACU-RITE VRO 300M - Manual (Page 59)

Setup VRO 300M
52
JOB CLOCK
ELAPSED TIME
RUNNING 1:38
Job Clock
The softkeys let you start and stop the job
clock, and let you reset it to zero. The actions
do not take effect until you leave setup with the
USE NEW
SETTINGS
softkey.
Feed Rate Units
Use the
IPM
and
MMPM
softkeys to change the feed rate units between
inches per minute and mm per minute.
Remote Switch
The external switch (pendant or footswitch)
can be enabled to perform any or all of the
following functions:
• P
RINT
—print the current position. Enable
with the
YES
key, disable with the
NO
key.
• Z
ERO
—zero one or more axes. Use the axis
keys ( X for example) to specify which axes will zero when the switch is
pressed.
• N
EXT
—run the next program step. The
YES
and
NO
keys enable or
disable this function.
REMOTE SWITCH
PRINT
NO
ZERO
XYZ
NEXT
NO