ACU-RITE VRO 300M - Manual (Page 31)

Program Operations VRO 300M
24
Tool Steps
Put this step in your program whenever you
need to use a different tool. Press the
TOOL
key to bring up the Set Tool form.
T OOL S IZE —enter the diameter of the tool and,
optionally, its length offset.
U NITS —use the softkeys to select inches or
millimeters.
T
OOL
T
YPE
—use the TOOL
TYPES
softkey to open the
list of tool types. If you use the Tool Type feature, the readout can let you
know what kind of tool you had in mind when you wrote the program.
If you wish, press the
TOOL
LIBRARY
softkey to select a tool directly from the Tool
Library. Use the arrow keys to select the tool, and the ENTER key to put the
selected tool into the Tool Step.
SET TOOL
UNITS
INCH
TOOL SIZE
DIA
LEN
0.2500
0.5210
TOOL TYPE
FL END ML