Setting up your nüvi – Garmin nuvi 1300 User Manual

Page 8

background image


nüvi 1100/1200/1300/1400 Series Owner’s Manual

Getting Started

Setting Up Your nüvi

Before mounting the nüvi, see the Important Safety and Product Information guide for information

about laws pertaining to windshield mounting.

Mounting Your nüvi

1. Remove the clear plastic from the suction cup. Place the suction cup on the


2. Flip the lever back toward the windshield.
3. Snap the cradle onto the suction cup arm.
4. Plug the vehicle power cable into the back of

your nüvi.

5. Plug the other end of the vehicle power

cable into a power outlet in your vehicle.

Your unit should turn on automatically if it is

plugged in and the vehicle is running. Follow the on-screen instructions.

6. Fit the bottom of your nüvi into the cradle.
7. Tilt your nüvi back until it snaps into place.
8. If you are using a traffic receiver in Europe,

connect the external antenna to the traffic

receiver and secure it to the windshield using

the suction cups. (Traffic receivers are included

in some nüvi packages. See

page iv.


WarNiNg: This product contains a lithium-ion battery. To prevent damage, remove the unit from the

vehicle when exiting or store it out of direct sunlight.

Suction cup mount


Vehicle power