Garmin GPSMAP 2110 - Manual (Page 24)

16 GPSMAP 2106/2110 Owner’s Manual
b
AsIc
o
PerAtIon
> r
evIewIng And
e
dItIng
w
AyPoInts
To change the waypoint name:
1. Highlight the waypoint name field, and press ENTER.
2. Use the ROCKER to enter a new name, and press ENTER.
To change the waypoint symbol:
1. Highlight the waypoint symbol field to the left of the waypoint name, and
press ENTER.
2. Use the ROCKER to select a different symbol, and press ENTER.
Waypoint Symbol List
To change the Comment, Position, Depth, or Water temp:
1. Highlight the Comment, Position, Depth, or Water temp field, and press
ENTER.
2. Use the ROCKER to enter new data, and press ENTER.
To zoom in or out on the map window the Review Waypoint Page:
Press the Zoom Up or Zoom Down keys.
Moving a Waypoint
You can modify a waypoint by moving or “projecting” the distance and bearing
from its present location to a new location.
To move the waypoint on the map:
1. Press the Move Wpt soft key. The map window on the right side of the
page is highlighted with the selected waypoint centered and highlighted on
a map display. The word MOVE appears below the pointer.
2. Use the ROCKER to move the waypoint to the new location. The distance
and bearing from the waypoint’s current location appears in the upper-left
corner of the map window.
3. Press ENTER to accept the new waypoint location.