Garmin GPSMAP 2110 - Manual (Page 78)

0 GPSMAP 2106/2110 Owner’s Manual
M
AIn
M
enu
> t
eMP
(t
eMPerAture
) t
Ab
3. Press the Off soft key to select or hide the map family, or press the On
soft key to show the map family. The map appears on the Map Page when
a check mark appears in the box adjacent to the map.
OR
Press the Show All soft key to show all map families. Press the Show
None soft key to clear all check boxes.
4 To view the notes or chart information for that map area, highlight the map
name, and press ENTER.
5. Press the Chart Info soft key to view chart information. Press the Notes
soft key to view chart notes.
6. To scroll through the notes, highlight the Notes fields, press ENTER, and
use the ROCKER to scroll up, down, left, and right.
7. Press QUIT to exit.
Temp (Temperature) Tab
The Temp tab displays the water temperature log (if equipped with a temperature
sensing transducer or receiving NMEA Sonar temperature data). The chart reads
from right to left, so that the most recent temperature measured appears on the far
right side of the chart. The dotted grid lines within the chart indicate intervals in
the temperature scale and the duration of time.
• log and Graph Scale—sets the temperature range (in degrees) for the
log. Select Auto to have the unit automatically determine the best range,
or select a span of 2, 4, 6, 8, or 10 degrees. Use the Reset button in Auto
mode to reset the automatic range.
• log Duration—sets how fast or slow the temperature log scrolls (the
shorter the time duration, the faster the temperature log scrolls). Select a
duration from 1 minute to 2.5 hours.