Garmin GPSMAP 2110 - Manual (Page 37)

GPSMAP 2106/2110 Owner’s Manual 2
b
AsIc
o
PerAtIon
> c
reAtIng And
u
sIng
r
outes
Planning Routes
After you create a route, you can enter information on the Plan Route window
such as your speed, departure time, fuel flow, and departure date so your
GPSMAP 2106/2110 can estimate information about your trip.
To plan your route:
1. Press the Plan soft key on the Route list to open the Plan Route window.
2. Enter planning data for speed and fuel flow. You can also enter the date
and time of your departure. As you enter planning information, the fields
on the Route list are automatically calculated.
NOTE: Fuel flow rates are measured in units per hour. System setting changes
for units of measure (statute, nautical, or metric) do not affect the fuel flow
measure. You should enter fuel flow rates based on available information for
your boat (operators manual, performance specifications) and note the units of
measure (gallons, liters, and so on).
3. Press QUIT to return to the Route List.
To change the data column (Plan Route feature):
1. On the Route list, highlight the adjustment button to the right of the
Course column header, and press ENTER. The middle title is highlighted.
Planning
features
2. Press left or right on the ROCKER to select one of nine available planning
features, including ETA (Estimated Time of Arrival at point), Fuel (to point),
Leg Dist, Leg Fuel, Leg Time, Sunrise, Sunset (at point location), and
Time To (point).
The unit automatically recalculates each waypoint in the route based on
the planning feature selected.
3. Press ENTER when you are finished.