Garmin GPSMAP 2110 - Manual (Page 77)

GPSMAP 2106/2110 Owner’s Manual 6
M
AIn
M
enu
> M
AP
t
Ab
AIS Sub Tab
AIS (Automatic Identification System) alerts you to area traffic. AIS provides
ship IDs, position, course, and speed for ships equipped with a transponder within
range.
NOTE: You must set your chartplotter communication to NMEA In/NMEA
Out with a baud rate of 38,400 to receive AIS information.
The AIS sub tab contains the following options:
• AIS Vessels—sets the maximum zoom scale at which AIS vessels appear
on-screen. Select Off, Auto, All Ranges, or <30 ft to <800 nm.
• heading line—draws an extension from the end of the boat icon in the
direction of travel. For Time, enter the numeric time value for which you
want the line to extend. The Time line length automatically adjusts as your
speed changes.
Source Sub Tab
Use the Source sub tab to turn basemaps and card maps on or off.
• Built-in Map—turns the built-in basemap on or off.
• External Maps—turns all optional BlueChart g2 or MapSource data on the
data card on or off.
Use the Advanced soft key to show a list of the optional BlueChart or
MapSource data loaded on the data card. Each map family (or type) is described
by name and can be hidden if you do not want to show the data on the Map Page.
To show the Advanced Map Card Setup:
1. Press the Advanced soft key to open the Advanced Map Card Setup
window.
2. Use the ROCKER to highlight a map family in the Map Family Name list.