Garmin GPSMAP 2110 - Manual (Page 43)

GPSMAP 2106/2110 Owner’s Manual 
M
AIn
P
Ages
> M
AP
P
Age
Use the Up and Down keys and the ROCKER to select zoom ranges and move
the map pointer. Two basic map operating modes, Position mode and Pointer
mode, determine what cartography (map data) is shown on the Map Page.
Position mode pans the cartography to keep the current position marker within the
display area, whereas Pointer mode pans the cartography to keep the map pointer
within the display area.
The GPSMAP 2106/2110 starts in Position mode, with your location centered on
the map.
Press up, down, left, or right on the ROCKER to enter Pointer mode. In Pointer
mode:
• You can move the map pointer over the map display using the ROCKER.
• When the map pointer reaches the edge of the display, the map scrolls
forward under the pointer. Keep in mind that the boat icon moves with the
map scrolling and may go off the screen (you might not be able to see your
current location).
• When the map pointer is stationary, a fixed coordinate location appears in
the position field. The distance and bearing change as the boat’s location
changes.
• When you change the range in Pointer mode, the map pointer is centered
on the screen.
• To return to Position mode, press QUIT.
NOTE: When the map pointer reaches the edge of the map, the unit may pause
as it loads new map data.
Geographic name
Map
item
Land
Map range
Navaids
Boat icon
Water
User waypoint
Selecting Map Ranges
The map display has 28 available range scales from 20 ft to 800 mi (5 m to 1,200
km). The map range is controlled by the Up and Down keys, with the current
range shown at the lower-right corner of the Map Page.
To select a map range:
Press the Up key to zoom out or the Down key to zoom in.
NOTE: The scale value represents the distance from one end of the scale bar to
the other.