Garmin GPSMAP 2110 - Manual (Page 26)

1 GPSMAP 2106/2110 Owner’s Manual
b
AsIc
o
PerAtIon
> r
evIewIng And
e
dItIng
w
AyPoInts
To delete a single waypoint from the User sub tab:
1. Use the ROCKER to highlight the waypoint you want to delete, and then
press the Delete Waypoint soft key. A confirmation message appears.
2. Highlight OK, and press ENTER to delete the selected waypoint.
To delete waypoints by symbol:
1. On the User sub tab, highlight the waypoint you want to delete.
2. Press the Delete By Symbol soft key.
3. Use the ROCKER to highlight the symbol of the waypoints you want to
delete, and press ENTER.
4. Highlight OK, and press ENTER to delete the waypoints by symbol.
Otherwise, highlight Cancel, and press ENTER to return to the User sub
tab without deleting any waypoints.
To delete all user waypoints:
1. On the User sub tab, press the Delete All soft key.
2. Highlight OK, and press ENTER to delete all user waypoints.
Proximity Waypoints
Use the Proximity sub tab to define an alarm circle around a stored waypoint. The
alarm circle can help you avoid reefs, rocks, or restricted waters. You can add
proximity alarms to a maximum of 10 waypoints or on-screen map items, with a
maximum alarm radius of 99.99 nautical or statute miles, or kilometers.
If a proximity alarm circle overlaps an existing alarm circle, the message
“Proximity Overlaps Another Proximity Waypoint” appears. Because the unit
only alerts for one of the overlap points, use caution when navigating in these
areas. If your boat enters a red proximity circle overlap, you are alerted only to
the closest proximity waypoint.
Proximity circle Proximity waypoint