Garmin GPSMAP 2110 - Manual (Page 68)

60 GPSMAP 2106/2110 Owner’s Manual
M
AIn
M
enu
> s
ysteM
t
Ab
The following settings are available:
• Position Format—used to change the coordinate system in which a given
location reading appears. Only change the position format if you are using
a map or chart that specifies a different position format or you want to use a
format you are familiar with. The default format is latitude and longitude in
degrees, minutes, and thousandths of a minute (hddd°mm.mmm’).
• Depth—select the units of measure for depth in Feet (ft), Fathoms (fa),
or Meters (m). You must be receiving NMEA Sonar depth data or using a
Garmin Sonar Module for the depth to appear.
• Map Datum—manually select the datum reference used to determine
a given location. The default setting is WGS 84. The unit automatically
selects the best datum depending on your chosen position format. Datums
are used to describe geographic locations for surveying, mapping, and
navigation and are not actual maps built in the unit. Although more than
100 datums are available, you should change the datum only if you are
using a map or chart that specifies a different datum.
WARNING: Selecting the wrong map datum can result in substantial
position errors. When in doubt, use the default WGS 84 datum for best overall
performance.
• Temperature—set the units of measure for temperature in Fahrenheit (°F)
or Celsius (°C). You must be receiving NMEA Sonar temperature data or
using a Garmin Sonar Module for the Temperature to appear.
• Distance, Speed, and Elevation—set the units of measure for distance,
speed and elevation readouts in Nautical (nm, kt, ft), Nautical (nm, kt, m),
Statute (mi, mh, ft), or Metric (km, kh, m) terms.
• Pressure—set the units of measure you want to use for weather readouts
in Inches Mercury (in), Millibars (mb), or Hectopascals (hPa). You must be
using a Garmin weather product for this data to appear.
• heading—set the reference used in calculating heading information. You
can select Auto Mag Var, True, Grid, and User Mag Var. Auto Mag
Var provides magnetic north heading references that are automatically
determined from your present location. True provides headings based
on a true north reference. Grid provides headings based on a grid north
reference. User Mag Var allows you to specify the magnetic variation at