Bosch GHO 40-82 C Professional - Manual (Page 13)

English | 13
Bosch Power Tools 1 619 929 J65 | (12.10.11)
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Depth adjustment knob (insulated gripping surface)
2 Chip ejector (alternatively right/left)
3 Storage compartment for planer blade/
Allen key
4 Planing depth scale
5 Lock-off button for On/Off switch
6 On/Off switch
7 Belt cover
8 Screw for belt cover
9 Chip ejection selector lever
10 Planer base plate
11 V-grooves
12 Handle (insulated gripping surface)
13 Blade drum
14 Clamping element for blade
15 Fastening screw for planer blade
16 Carbide blade (TC)
17 Lateral blade-shaft protector
18 Allen key
19 Extraction hose (Ø 35 mm)*
20 Chip/dust bag*
21 Parallel guide*
22 Locking nut for adjustment of rebating width*
23 Fastening bolt for parallel and beveling guide*
24 Angle stop*
25 Locking nut for angle adjustment*
26 Fastening bolt for rebating depth stop*
27 Rebating depth stop*
28 Park rest
29 Service station*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 85 dB(A); Sound power level 96 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
a
h
=7.5 m/s 2 , K=1.5 m/s 2 .
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
28.09.2011
Planer GHO 40-82 C
Professional
Article number 0 601 59A 7..
0 601 59A A..
Rated power input W 850
Output power W 450
No-load speed min -1 14000
Planing depth mm 0 – 4.0
Rebating depth mm 0 – 24
Planing width, max. mm 82
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
Weight according to
EPTA-Procedure 01/2003 kg 3.2
Protection class /II
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Engineering Director
PT/ESI
Planer GHO 40-82 C
Professional
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
OBJ_BUCH-633-004.book Page 13 Wednesday, October 12, 2011 11:07 AM