American Magnetics 12200PS DC Power Supply (CE-Marked) - Manual (Page 10)

OPERATING MANUAL FEATURES AND SPECIFICATIONS
Release 1.0 (98/07) 1-1
1. FEATURES AND SPECIFICATIONS
1.1 Description
This series of power supplies provides low noise, precisely regulated, variable DC output at 2800 Watts of
output power. Over voltage protection and thermal shutdown are standard. Front panel controls and indicators
are extensive. Select from several remote control choices: standard analog programming, standard remote
monitoring of output voltage and current; optional isolated programming or readback, and optional GPIB
programming or RS-232 control. Use this power supply either on your bench or in a standard 19" rack: the unit
occupies only 3.5" (2U) of vertical rack space. Designed for continuous use in standalone or systems
applications, this power supply is typically used to power DC equipment, control magnets, or burn in
components. See Table 1.1-1 for the list of available models.
Table 1.1-1 Available Voltage and Current Ranges
Model Voltage Range Current Range
7.5-300 0-7.5V 0-300A
12-220 0-12V 0-220A
20-130 0-20V 0-130A
40-70 0-40V 0-70A
60-46 0-60V 0-46A
100-28 0-100V 0-28A
150-18 0-150V 0-18A
300-9 0-300V 0-9A
600-4 0-600V 0-4A
1.2 Features and Options
•
Simultaneous digital display of both voltage and current.
•
Ten-turn front panel voltage and current controls for high resolution setting of the output voltage and
current from zero to the rated output.
•
Automatic mode crossover into current or voltage mode.
•
Front panel push button control of output standby mode and preview of voltage, current, or over
voltage protection (OVP) setpoints. Front panel light emitting diode (LED) indicators for voltage and
current mode operation, OVP, remote programming mode, and shutdown. Front panel control
of OVP.
•
Multiple units can be connected in parallel or series to provide increased current or voltage.
•
Thermal shutdown, latching or auto reset.
•
Remote analog voltage and current limit programming with selectable programming ranges.
•
External monitor signals for output voltage and current.
•
Isolated analog remote programming control of the output voltage or current and isolated readback of
output voltage and current with the optional ISOL Interface.
•
Optional internal GPIB or RS-232 computer control for remote digital programming and readback
capability.
•
Rack mount brackets at the front panel are standard.