Using handsfree speakerphone, Using a headset, Advanced volume controls for the headset mic – AASTRA 6757i User Guide EN User Manual
Page 124: Making calls
Making Calls
117
41-001385-00 Rev 01 – 06.2013
Using Handsfree Speakerphone
The handsfree feature allows you to speak to someone without using the handset or headset. Your phone must be in
either the Speaker or Speaker/Headset audio mode. For more information about setting the audio mode on your phone,
see
on
.
•
To dial using handsfree, first press
and enter a number at the dial tone.
•
To answer a call on your phone using handsfree, press
or the line/call appearance key.
•
If you are in Speaker audio mode, lift the handset and press
to switch between handsfree and handset.
•
If you are in Speaker/headset audio mode, press
to switch between handsfree and headset.
•
When the handset is on hook, press
to disconnect the call.
When handsfree is on, the speaker light turns on.
Using a Headset
The 6757i accepts headsets through the modular RJ22 jack on the back of the phone. Contact your telephone equip-
ment retailer or distributor to purchase a compatible headset.
Advanced Volume Controls for the Headset Mic
On the 6757i, there are 3 options for the headset microphone volume. For more information about the headset micro-
phone, see
.
To change this volume:
IP Phone UI
Note:
Customers should read and observe all safety recommendations contained in headset operating guides when using
any headset.
IP Phone UI
1.
Press
to enter the Options list.
2.
Select Preferences and press Select.
3.
Use
2 to scroll down to Set Audio and press Select.
4.
Press
2 to scroll down to Headset/Mic Volume and press Select.
5.
Use
2 to scroll down the list to select your desired volume.
6.
Press Done to save changes and exit.
7.
If you do not wish to save changes, press Cancel to return to the previous screen.
Note:
By default, the volume for the headset microphone is set to medium.