When starting the amc application – AASTRA AMC EN User Manual
Page 13
When starting the AMC application
eud-1048/2.2 – AMC v2.0 – 05.2011
13
Option 2:
1. You receive three or four
1)
SMS messages on your mobile phone. The mes-
sages contain the download address, configuration data and licence. Open
the SMS message containing the download address. Depending on the
mobile phone you might receive an e-mail in place of the SMS.
1)
Depending on the Aastra communication system the Aastra Mobile Client is used with.
2. Select the message that includes an internet address and open the linked
internet pages with the
Get link
command.
3. Follow the steps in the download wizard. Confirm the settings and begin
downloading via
Agree and download now
.
4. After downloading, confirm software installation.
5. When you start the Aastra Mobile Client for the first time, the operating sys-
tem will indicate that the application is attempting to access telephone
information. Select
Do not ask me again
and accept.
6. It will then show you the permissions lists of the Aastra Mobile Client. Both
settings (
Interactions
and
Injection
) should be set to
Allow
. Save the settings.
Note:
Please contact your system administrator if you need more information.
Note:
While updating the mobile operating sytem on your mobile phone, you may loose
the licence information and configuration files as well as the AMC application. If
needed please reinstall the AMC after an update and resend licence and configura-
tion.
eud-1048_en.book Page 13 Wednesday, May 4, 2011 12:21 PM