AASTRA AMC EN - Manual (Page 20)

Enhanced operation
20
eud-1048/2.2 – AMC v2.0 – 05.2011
Out-of-call services:
Function Explanation
Absence Info
1)
The predefined absence info can be activated or deactivated by this function.
Call pickup 1) Takes a current call from your system phone on your mobile phone (or vice
versa): After a slight delay, you can continue the current call on your mobile
phone. The
Take number is configured in the Settings menu.
Call protect 1) Prevents that calls are forwarded from the communication system to the
mobile phone. Direct calls to the mobile phone number are not affected.
Call retrieve
1)
Enables you to take a call from a waiting queue.
Call waiting protection 1) Switches call waiting protection on or off:
Select the settings you want in the menu which is activated after a brief delay.
Do not disturb 1) Activates/Deactivates the Do not disturb function after a brief delay. While
the function is off, no calls are routed to your Aastra Mobile Client.
Forwarding
1)
Configures or deletes a call forwarding.
Use the select keys to select the call forwarding type you want:
•
Call forwarding : immediately
• Forwarding on No Reply : after time
• Forwarding if Busy : if busy
➔
Activate with the select key or with the OK softkey.
Select the destination you want in the next menu:
•
User : a call number
• Voice Mail : the voice mail
• Forwarding off : turn off
➔
Activate with the select key or with the OK softkey.
➔
After a brief delay, the call forwarding configuration you want is activated
on the communication system.
Note:
Depending on the Aastra communication system your system administrator
is able provide you with further forwarding functions he can add in the fea-
ture file. Please contact your Aastra Mobile Client administrator for more
information.
Master/Slave 1) Log on/Log off procedure for Master/Slave:
With this simple procedure the slave can be set to
Log On and Log Off mode.
During Log Off mode the slave (AMC user) is blocked for incoming calls.
Incoming calls will only be indicated on the master telephone.
During this logged-off period it is still possible for the slave to set up a call.
If the slave is logged on, incoming calls will be indicated – depending on the
configuration – on both phones or only on the slave.
Personal call routing 1) Specify where incoming calls shall be routed to. Function only appears if the
personal call routing is configured in the communication system for this user.
Redkey 1) Activates a Redkey function. Function only appears if the alarm key is config-
ured in the communication system.
Take 1) See Call pickup .
eud-1048_en.book Page 20 Wednesday, May 4, 2011 12:21 PM