When starting the amc application – AASTRA AMC EN User Manual
Page 8
8
eud-1048/2.2 – AMC v2.0 – 05.2011
When starting the AMC application
Installation and configuration of Symbian-based devices
Aastra Mobile Client installation and configuration:
The Aastra Mobile Client is delivered with two alliterative configuration options. If you
have received an e-mail or an SMS containing the "AMC user account key" information
your system administrator has chosen option 2 as follows:
Note:
Before you start installing, there are two settings which you have to adjust in the
Application Manager of your phone:
• Software Installation has to be set to All.
• Check online certificate has to be turned off.
We also recommend a firmware update of the phone:
•
.
• If you are outside of Europe, please refer to the device documentation or go to
for the appropriate website.
Note:
The Aastra Mobile Client will automatically read the configuration and licence SMS
messages and delete them once the AMC+ has been started.
Option 1:
1. You receive three or four
1)
SMS messages on your mobile phone. The mes-
sages contain the download address, configuration data and licence. Open
the SMS message containing the download address.
1)
Depending on the Aastra communication system the Aastra Mobile Client is used with.
2. Select the internet address and open the linked internet pages with the
Download message
command. Confirm the internet access.
3. Follow the steps in the download wizard. Confirm the settings and begin
downloading via
Agree and download now
.
4. After downloading, confirm the software installation. Then launch the
installed software from the mobile phone’s user interface.
5. When starting, the application searches the SMS messages received for the
configuration and licence. It automatically downloads the information in
the messages. After a restart of the application the Aastra Mobile Client is
ready for use.
eud-1048_en.book Page 8 Wednesday, May 4, 2011 12:21 PM