AASTRA AMC EN - Manual (Page 15)

eud-1048/2.2 – AMC v2.0 – 05.2011
15
Operation
Starting, minimising and ending the Aastra Mobile Client
When you launch the Aastra Mobile Client from your mobile telephone, the regular
telephony software installed by the mobile telephone manufacturer is simultaneously
active. You can switch back and forth between the programmes.
To make switching convenient, you should create a one-touch key or a desktop link
for the Aastra Mobile Client. Please refer to the user's guide of your mobile phone for
details.
Answering calls
A call to your system telephone extension is signalled on your mobile telephone after
a brief delay as well. The Aastra Mobile Client shows the number of the calling party
on its display (if configured or supported by the communication system). This is also
the case if the application is minimised and running in the background.
To start the application on:
Android/BlackBerry:
Click the Aastra Mobile Client icon in the main menu.
Symbian: Open the Aastra Mobile Client in the installations folder or click the
icon you have configured.
To keep the Aastra Mobile Client active in the background:
BlackBerry:
Press the back key. This is also supported in an active call.
Symbian: Press the red key. This can only be done when there is no active call.
To close the Aastra Mobile Client:
In the Options menu select the Exit command.
Note:
The Aastra Mobile Client software should be active at all times and only be exited in
special cases.
1. The calling party’s number is always displayed in the international format
(+44...). If there is a matching entry in the phonebook of the mobile phone,
the relevant name will be displayed as well.
2. Android/BlackBerry: You can answer calls via the standard operating pro-
cedures of your mobile phone or via Menu key > Answer .
Symbian: You can answer calls via the standard operating procedures of
your mobile phone or via Options > Answer .
eud-1048_en.book Page 15 Wednesday, May 4, 2011 12:21 PM