User pin (aastra intelligate/aastra 400 only), Fast forward number (mx-one™ only), Dial mode – AASTRA AMC EN User Manual
Page 23: Amc settings
AMC settings
eud-1048/2.2 – AMC v2.0 – 05.2011
23
User PIN (Aastra IntelliGate/Aastra 400 only)
When you change your user PIN on the Aastra communication system you will also
have to change your preconfigured PIN on the Aastra Mobile Client if your communi-
cation system requires a PIN for the login.
For the next outgoing call via your Aastra communication system the new user PIN is
used for the login procedure, if the communication system requires a PIN.
Fast forward number (MX-ONE™ only)
The
Fast forward number
is the number used when requesting the fast forwarding
function during an active call.
Dial mode
In the
Settings
menu you may configure the Aastra Mobile Client in two different dial-
ling modes:
Dual Identitiy
and
Always Aastra MC
.
Dual Identity
: Select this menu option if you want to use the Aastra Mobile Client to
route outgoing calls via your Aastra communication system and to make direct
mobile phone calls when the Aastra Mobile Client application is minimised. Dual iden-
tity mode is often used when you use your mobile phone for both business and pri-
vate calls.
Always Aastra MC
(Standard): All outgoing calls are routed via your Aastra communica-
tion system, even if the Aastra Mobile Client is minimised and running in the back-
ground. During the dialling procedure the Aastra Mobile Client is automatically active.
Note that emergency calls shall be directly placed from the mobile phone and not
from the Aastra Mobile Client.
1. Select the
Settings
command in the
Options
menu.
2. In the
Settings
menu, select the
PIN
command.
3. Enter your new user PIN.
4. BlackBerry:
Confirm it with
Save
.
Symbian:
Confirm with the
OK
softkey.
eud-1048_en.book Page 23 Wednesday, May 4, 2011 12:21 PM