After an extend action, After an extend slow/fast action – EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual User Manual
Page 104

IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment – May 2009
Issue 5.6.A
95
Before the Extend Action
The user places an OUT point to show up to which position IPEdit should extend
the OUT point of the element ‘clip adl_090514_1-00’.
After an Extend Action
When the user clicks the Extend icon
, IPEdit automatically shifts the OUT
point of the clip to the position of the mark OUT point. As the user is in Overwrite
mode, the duration of the next timeline element is reduced.
After an Extend Slow/Fast Action
When the user clicks the Extend Slow/Fast icon
, IPEdit automatically shifts
the OUT point of the clip to the position of the mark OUT point and adapts the
playout speed of the timeline element and displays it on the extended elements.
As no new material is added, the duration of the extended element is not modified.
As the user is in Overwrite mode, the duration of the next timeline element is
reduced.