5 how to slide an element using the shuttlepro, Ow to, Lide an – EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual User Manual
Page 141: Lement, Sing the, Huttle
Issue 5.6.A
IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment - 2009
132
4.11.5 H
OW TO
S
LIDE AN
E
LEMENT
U
SING THE
S
HUTTLE
PRO
To slide one or more elements of the same source media using the ShuttlePRO,
proceed as follows:
1.
Activate the slide mode on the requested elements by lassoing the whole
elements from right to left, keeping the CTRL key pressed.
See also section 4.11.2 ‘Activating and Deactivating the Slide Mode’, on
page 128.
Î
2.
Click the requested Timeline Track Selection buttons to select or unselect
the tracks you want or do not want to slip.
3.
Rotate the jog to the left or to the right to slide the elements respectively to
the left or to the right.
When you stop turning the jog, the slide action is applied within 1 sec.
4.
Click anywhere in the Lasso Selection area to leave the slip mode.