EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual - Manual (Page 200)

IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment – May 2009
Issue 5.6.A
191
3. In the Add GPI OUT dialog box, do the following:
• In the Link GPI to clip on group box, tick the track on which the GPI will
be defined and applied. Only the tracks on which an element exists on the
requested GPI position are enabled.
• In the GPI settings group box, select the GPI OUT number from the GPI
Out drop-down list.
• In the GPI settings group box, select the GPI mode from the Output Mode
drop-down list.
4. Click Apply.
A purple GPI marker is added to the Timecode bar to identify the GPI defined. The
track letter is displayed in the GPI marker:
The GPI settings will display after one second when you position the mouse cursor
on the GPI marker:
S
ELECTING AND
D
ESELECTING A
C
LIP
GPI
How to Select a Clip GPI
To select a clip GPI, proceed as follows:
• Left-click the mouse in the Lasso Selection area and drag the mouse from left to
right to cover the clip GPI marker:
When you release the mouse key, the clip GPI is selected and the marker turns
blue
.
How to Deselect a Clip GPI
To deselect a clip GPI, simply click in the Lasso Selection area. The clip GPI
marker will turn back to purple.