Unconverted features, Audio channel assignment, 4 opening a timeline – EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual User Manual

Page 71: Introduction, Prerequisites, Conditions to fulfil, Pening a, Imeline

Advertising
background image

Issue 5.6.A

IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit

EVS Broadcast Equipment - 2009

62

•

the speed of video elements

•

the video transition effects and types.
The video transitions are all translated to ‘centered on cut’ transitions.

•

the audio transition effects and types.

•

the swap/mute points

•

the GPIs

Unconverted Features

The conversion process will not preserve:

•

the Hide tag

•

the Start mode settings

•

the Stop mode settings

•

the auxiliary track

•

the Loop mode settings

•

the record train delay

Audio Channel Assignment

By default, the audio channels are assigned as follows:

•

The channels 1/2 are converted to G1 (4 channel- or 8 channel-configuration)

•

The channels 3/4 are converted to G2 (4 channel- or 8 channel-configuration)

•

The channels 5/6 are converted to G3 (8-channel configuration)

•

The channels 7/8 are converted to G4 (8-channel configuration)

4.2.4 O

PENING A

T

IMELINE

I

NTRODUCTION

There are different ways to open a timeline. This section describes the two modes
to open the timeline from IPEdit.

Prerequisites

In all cases, you first need to ensure that a timeline engine is assigned to IPEdit.

Conditions to Fulfil

The timeline can only be loaded in IPEdit if the following conditions are fulfilled:

•

The timeline contains the same number of tracks and channels as the local

XT[2] server configuration.

If this is not the case, you cannot load the timeline.

•

The timeline definition, at least, is stored on the local XT[2] server.
If this is not the case, you can create a copy of the timeline definition and, if
requested, a copy of its elements.

Advertising