EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual - Manual (Page 155)

Issue 5.6.A IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment - 2009
146
4. In the Transition Effect group box, modify the default settings for the effect
type, duration and position, if needed. For example:
5. In the Video Transition GPI, specify a Start transition GPI and an End
transition GPI, if requested. For example, no GPIs are defined.
6. Tick the check box Apply to all transitions between mark in and mark
out.
7. If you want to overwrite any transition effect that may have been previously
defined on the selected transitions, tick the check box Overwrite existing
transition effects.
8. Click the Add button.
The transition effects are added to the beginning transitions of the elements that
are covered by the mark IN and mark OUT points and that are selected in the
Track group box. The effects have the settings defined in the Transition Effect
group box and the GPIs defined on the video track, if any: