EVS IPDirector Version 5.6 - May 2009 Part 7 User's Manual - Manual (Page 96)

IPDirector V.5.6 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment – May 2009
Issue 5.6.A
87
R
EPLACING
T
IMELINE
P
ARTS
F
ROM
M
ARK
IN
TO
M
ARK
OUT
Schema
The following schema shows how the Match Frame Replace is performed when a
part of timeline between a mark IN and a mark OUT points is replaced.
Procedure
To replace parts of a timeline between a mark IN and mark OUT points using the
Match Frame Replace function, proceed as follows:
1. In the Player and Timeline panes, select the tracks to be taken into account
when you will insert the media. See also the section ‘Track Selection
Applied to the Timeline Element’, on page 80.
2. In the Player panel, load the clip or train that contains the material to be
inserted into the timeline.
3. Click in the jog bar to define the reference position in the loaded media.
4. In the loaded timeline, place the mark IN and Mark Out to define the
timeline portion to be replaced.
6. Do one of the following to execute the Match Frame Replace:
• In the Player, click the Match Frame Replace icon
• On the keyboard, press