Hotchkis 2280 CTS-V Sport Sway Bars - Manual (Page 4)

»
Fish the Hotchkis bar in the same way as stock removal.
»
We provide you with new bushings, brackets and an adapter block that replaces the stock bracket
and bushing.
»
Lube the inside surface of the bushings with the provided grease.
»
Slip the bushings over the sway bar in the proper position. Slide the Hotchkis bracket over top the
bushing. Make sure the Zerk fitting is pointing towards the outside of vehicle.
»
Insert the adapter block as shown in the picture. Install the provided longer bolt and washer. Reuse
the stock bolt for the forward bracket hole. Fully tighten bolts.