Hotchkis 2280 CTS-V Sport Sway Bars - Manual (Page 6)

INSTALLATION OF HOTCHKIS REAR SWAY BAR
»
The ideal way to install the rear sway bar is doing so while the suspension is at ride height. This
would require an alignment rack (professional) or using floor ramps (these can be found at most auto
parts stores). When using floor ramps, drive the rear end of the car onto the ramps and block the
front wheels.
If an alignment rack or floor ramps are not accessible:
Secure the front wheels with blocks and jack the rear up until the wheels are off the ground. Support
the rear of the vehicle with jack stands on the factory jack points. Do not remove wheels.
»
Undo the sway bar end link nut using a 15mm socket. Retain this hardware for later use.
»
Undo the 2 subframe mount bolts on each side. Retain this hardware for later use.