Hotchkis 2280 CTS-V Sport Sway Bars - Manual (Page 7)

»
The exhaust system will need to be dropped in order to remove the sway bar. First spray some WD-
40 on the rubber hangers that hold the mufflers and exhaust piping. This will ease the task of
undoing the hangers from the exhaust. Using a pry bar, pop the rubber hangers off of the exhaust
hanger. Once all of the hangers are disconnected, the exhaust should hang down.
»
Remove the center brace located in the center of the car to allow the exhaust to drop even further.
»
You should now be able to remove the rear sway bar from the vehicle. Note orientation as you
remove the sway bar so you can install the Hotchkis bar in the same manner.
»
Place the stock sway bar on the floor and set your new Hotchkis sway bar next to it. This will allow
you to properly orient and position the bar for reinstallation.