Hotchkis 22815 Audi Allroad Sport Sway Bar Set User Manual
Page 5
7/
Re-install the bracket nuts and tighten. Use a small portion of blue
thread-locker on the end-link bolts, re-install and tighten well. **Note** If
vehicle is raised using jack stands or other, the bar end and the end link
may not align properly. Lower vehicle so that front suspension is not at
full droop and ends will align. Be sure to thread end link bolt by hand at
first to prevent cross-threading
.
8/
Re-install the aero pan.
8/
Re-install the aero pan.
Enjoy your new tubular Sway Bar kit from Hotchkis! If you need assistance with
the install or have any other questions, go to the ‘instructions’ button on our site
or call us at the number below.
Thank you for choosing the best Sway Bar kit available for your Audi Allroad!
Hotchkis Performance
Corey Bedortha
562.907.7757 ext 227
12035 Burke St. Suite 11
Santa Fe Springs, CA 90670