Hotchkis 81001 Chassis, Max Convertible Set, 67-69 Camaro-Firebird F-Body User Manual
Page 11
Advertising
4007/4008/4009 67-69 Camaro/Firebird
Hotchkis Performance LLC.
5
Weld-In: Mark the front subframe to indicate where you should grind/sand the paint for
welding. The connector hole will allow you to apply a rosette weld instead of a bolt.
You may also want to mark where the leading edge of the connector lies on the
subframe so you can run a weld bead there as well.
Mark the rear frame rails along the edge of the connector. This will show you where to
grind the paint/grime off the frame. Don’t forget the outboard tab. This area will be
difficult to access since the leaf spring and bracket are in the way.
Advertising