Hotchkis 81001 Chassis, Max Convertible Set, 67-69 Camaro-Firebird F-Body - Manual (Page 15)

4007/4008/4009 67-69 Camaro/Firebird
Hotchkis Performance LLC.
9
Tack weld 2-3 of the rosette holes on the inboard tab to the frame rails. Tack weld the
rear edge of the connector. Once you have these minimum welds complete, you may
raise the vehicle again to access the outboard tab. Completely weld both rosettes and
any edges. Lower the vehicle back on it’s wheels and finish the inboard rosette welds
and remaining edges to be welded. To protect the brake line (driver side) and the fuel
line (passenger side) from the welding radiation and sparks, cover them with aluminum
foil.
Outboard Tab