Hotchkis 22105 "Tri 5 Chevy Front Sport Sway Bar" - Manual (Page 8)

1R
Raising Car
Raise rear of the vehicle by using a 4 post lift or drive-on ramps. Securely block the front
wheels of the vehicle. Do not remove the rear wheels during installation for safety. It is
imperative that the vehicle is at ride height for this installation.
2R
Install U-Bolts (kit#T1722) on Rear Axle
Take the washers and nuts off of the U-bolts and slide them on top of the axle tubes on each
side. They should be centered and approx. 27” apart from each other. If you have any brake
lines in the way, you must relocate them. This could be as easy as unclipping them and
bending them away from the axle tubes. Apply the supplied anti-seize to the threads of the U-
bolts.
Installation of Hotchkis Rear Sway Bar