Hotchkis 22105 "Tri 5 Chevy Front Sport Sway Bar" - Manual (Page 9)

3R
Prepare the Rear Sway Bar
Next, we are going to put all of the components on the sway bar before we install it on the
car. Grease the inside surface of the bushings with the supplied silicon lube. Install them on
the sway bar along with the bushing brackets.
You will also need to grease the outside surface of the dogbone end link bushings. Install the
end link onto the sway bar ends as shown in the picture. Use the hole closest to the end for
installation purposes. Next, install the frame bracket onto the other end of the end link. The
bolts do not need to be fully tight at this time, but they should be snug.