Hotchkis 22835F BMW E36 Front Sway Bar User Manual
Installation of hotchkis front sway bar
Advertising
Thank you for your purchase from our new line of BMW parts.
Please call us at 877 - 4NO - ROLL if you have any questions
regarding the service or installation of your Hotchkis Performance products.
1F
Raising
Vehicle
Raise front of the vehicle by using a 4 post lift or drive-on ramps. Securely block the rear
wheels of the vehicle. You do not have to remove the front wheels
2F
Remove OE Front Bar
a) Disconnect the sway bar end links from the sway bar ends.
b) Undo the bushing brackets by unfastening the 2 nuts for each bracket
c) Bar should be loose from the vehicle. Note the OE orientation for reference.
Installation of Hotchkis Front Sway Bar
Sport Sway Bar Kit 22835
91-99 BMW E36 M3
Advertising
Table of contents
Document Outline
- Installation of Hotchkis Front Sway Bar
- Sport Sway Bar Kit 22835
- Installation of Hotchkis Rear Sway Bar
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?