Installation of hotchkis rear sway bar, Raising, Vehicle – Hotchkis 22835F BMW E36 Front Sway Bar User Manual
Page 3: Remove stock bar, Remove the oe end link clevis mount
Advertising
1R
Raising
Vehicle
Raise rear of the vehicle by using a 4 post lift or drive-on ramps. Securely block the front
wheels. You do not have to remove the rear wheels.
2R
Remove Stock Bar
a) Disconnect the sway bar end link clevis mount from the upper control arm
b) Undo the bushing brackets by unfastening the 2 bolts for each bracket
c) Undo the rear exhaust hangers to gain more clearance.
d) Bar should be loose from the vehicle. Note the OE orientation for reference.
3R
Remove the OE End Link Clevis Mount
Your new Hotchkis kit includes new end links and hardware; however you will need to reuse
the OE end link clevis mount.
Installation of Hotchkis Rear Sway Bar
Advertising