Hotchkis 2255F Front Sway Bar Set, Dodge B-Body 1966-1969 User Manual
Hotchkis For the car
2255 SPORT SWAY BAR SET
62-69 CHRYSLER B-BODY
Thank you for your purchase.
Please call us at 1-877-4NO-ROLL if you have any questions regarding your Hotchkis
Performance products. Visit us online @
This installation may require drilling
new mounting holes in the frame for rear sway bar and
welding for the front. Please read the instructions carefully to avoid unnecessary drilling.
INSTALLATION OF HOTCHKIS PERFORMANCE
FRONT SWAY BAR
1. This installation should be done on a 4 post alignment rack or drive on ramps. It is
important that the car’s weight is on all 4 wheels in order to ensure that the suspension is in
normal static ride height position.
2. Begin by unbolting the metal radiator brace at the front of the vehicle that connects to the
radiator support to the front of the K-member. Please retain the radiator brace and the
stock hardware for reinstallation.
3. Unbolt and remove the stock end links connecting the old sway bar ends to the lower
control arms.
4. Unbolt and remove the stock bushing retainer brackets. The bushings are trapped in the
brackets and should be removed with the brackets and stock sway bar. The entire assembly
should just drop out when unbolted.
Document Outline
- FRONT SWAY BAR
- UImproperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- UImproperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- UInstalled in any vehicle that has been modified;
- UInstalled on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- UInstalled on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- UDid you register the product at U0TUwww.hotchkis.netU0TU or via the mail-in warranty card within 30 days of purchase?
- UIs the product appropriate to your application?
- UDid you carefully and thoroughly read the instructions provided along with the product?
- UDo you have the original invoice or sales receipt?
- UIs the return date within 36 months from the purchase date?
- UAre you the original purchaser?
- UWas the product properly installed by a qualified, licensed auto mechanic?
- UHas the product been installed on the original vehicle on which it was installed at all times?
- UIs the product unmodified and clean?
- UIs the reason for return a legitimate product defect?