Hotchkis 2255F Front Sway Bar Set, Dodge B-Body 1966-1969 User Manual
Page 6
Advertising
INSTALLATION OF HOTCHKIS PERFORMANCE REAR SWAY BAR
1)
Securely block the front wheels of the vehicle. Jack up the rear of the vehicle and place
it on jack stands. Place the jack under the differential housing on the axle to raise the axle to
the vehicle ride height for installation of the sway bar.
2)
Locate the hole on the bottom of each side of the frame behind the rear axle. Use the
triangle mounting brackets provided to locate and mark on the frame the location of the
second hole.
3)
Use the mark made on the frame to drill a 1/2" diameter hole. The studded bracket
included in the kit should now drop into place through the two holes in the frame. Use the
larger hole in the frame to slide the bracket into the frame.
Advertising