This installation will require drilling – Hotchkis 2273 Sway Bars, Set, 67-70 GM B-Body, Sport User Manual
Page 7
Please call us at (877) 4NO-ROLL if you have any questions regarding your Hotchkis
Performance products.
This installation will require drilling
new mounting holes for both the front and rear
sway bars. Please read instructions carefully to avoid unnecessary drilling.
INSTALLATION OF HOTCHKIS PERFORMANCE REAR SWAY BAR
1)
Securely block the front wheels of the vehicle. You will not need to jack up the rear end of the
vehicle to perform this installation.
2)
Begin by placing the u-bolts provided over the rear axle. Place them roughly the same distance
from the center of the axle, with the ends of the u-bolts pointed straight down.
3)
Use the grease pack provided to apply a heavy coat of grease to the inside of the sway bar
bushings. Place the bushings over the bar. The split in the bushings should face towards the
rear of the vehicle with the bar installed. Push the brackets over the sway bar bushings.