Grain Systems Bin Accessories PNEG-1859 - Manual (Page 65)

PNEG-1859 2.66" Corrugation 135' Diameter Tank with 50 PSF Snow Roof 65
10. 2.66" Commercial Tank Accessories Installation
Roof Vent Assembly
The following instructions are for assembling and installing the wire grill guard roof vent. Before beginning
assembly, check the packing list to ensure all components have been received. The unit is easiest
assembled in the upside down position as shown in
Figure 10C on Page 66 . Locate the roof vent as
shown in Figure 10G on Page 67.
Figure 10A Roof Panel
Figure 10B Center Collar Caulking Detail