Jamb plate assembly – Grain Systems Bin Accessories PNEG-1859 User Manual
Page 80
Advertising
10. 2.66" Commercial Tank Accessories Installation
80
PNEG-1859 2.66" Corrugation 135' Diameter Tank with 50 PSF Snow Roof
Jamb Plate Assembly
The jamb plates are bolted between the inner and outer door frame weldments (NCWT0246 (outer) and
NCWT0247 (inner)). The left jamb plate (NCWT0265L) has a “L” cut out in the plate.
for “L” detailed orientation. The jamb plates bolt to the frame weldments using 7/16" x 2-1/2" bin bolts
(S-9444) and special recessed nuts (S-8479). Bolt heads should be orientated to outside of bin.
Figure 10U
Advertising