Grain Systems Bin Accessories PNEG-1859 - Manual (Page 75)

10. 2.66" Commercial Tank Accessories Installation
PNEG-1859 2.66" Corrugation 135' Diameter Tank with 50 PSF Snow Roof 75
Ladder Section Assembly
Two (2) LDR-4317 splice plates are required to attach each ladder section. The head of the bolt should
be to the inside of the ladder with the splice plate on the outside as shown. Use 5/16" x 3/4" bolts for
all connections.
(See Figure 10N.)
NOTE: With most installations, the last ladder section installed to reach either the ground or the
intermediate platform will need to be cut to fit.
Figure 10N