Grain Systems PNEG-1798 - Manual (Page 16)

7. Procedure
16 PNEG-1798 Tower and T-Series Dryers Vaporizer
7.2.8. Verify that there are (2 ea.) 2-1/2" diameter, liquid filled, 0-200 PSIG, 1/4" NPT bottom mount
pressure gauges. Gauges will require (2 ea.) 3/4" to 1/4" reducing bushings that are mounted in
the 3/4" SCH 80 tees.
(See Figure 7F.) (Record this on the data sheet.)
Figure 7F Pressure Gauge (0-200 PSIG)
7.2.9. Verify that there are (3 ea.) 3/4" SCH 80 tees for the two (2) pressure gauges and one for the
pressure relief valve mounting. (Record this on the data sheet.)
7.2.10. Verify that there are (3 ea.) 3/4" to 1/4" SCH 80 bushings for the two (2) pressure gauges and one
for the pressure relief valve mounting. (Record this on the data sheet.)
7.2.11. Verify that there are at least (6 ea.) SCH 80 1-1/4" 90’s (elbows). (Record this on the data sheet.)
7.2.12. Verify that there are at least (6 ea.) SCH 80 3/4" 90’s (elbows). (Record this on the data sheet.)
7.2.13. Verify that there are at least (7 ea.) SCH 80 1-1/4" unions. (Record this on the data sheet.)
7.2.14. Verify that there are at least (7 ea.) SCH 80 3/4" unions. (Record this on the data sheet.)
7.2.15. Verify that there are at least (2 ea.) 3/4" SCH 80 45º and (2 ea.) 1-1/4" SCH 80 45º fittings.
(Record this on the data sheet.)
7.2.16. Verify that there is at least (1 ea.) SCH 80 1-1/4" x 3/4" reducer. (Record this on the data sheet.)
7.2.17. Verify that there is at least (1 ea.) SCH 80 2" x 1-1/4" reducer. (Record this on the data sheet.)
7.2.18. Verify that there are at least (2 ea.) SCH 40 2" x 4" L nipples. (Record this on the data sheet.)
7.2.19. Verify that there are at least (2 ea.) SCH 40 2" x 24" L nipples. (Record this on the data sheet.)
7.2.20. Verify that there are at least (2 ea.) 2" U-bolts. (Record this on the data sheet.)
7.2.21. Verify that there are at least (8 ea.) 1-1/4" U-bolts. (Record this on the data sheet.)
7.2.22. Verify that there are at least (4 ea.) 3/4" U-bolts. (Record this on the data sheet.)