Grain Systems PNEG-1798 - Manual (Page 17)

7. Procedure
PNEG-1798 Tower and T-Series Dryers Vaporizer 17
7.2.23. Verify that there are vaporizer coil mounting brackets (four (4) pair) in the kit or installed on the
coil, if it has been installed at the factory. (See Figure 7G and Figure 7H.)
7G + 7H = 1 pair
(Record this on the data sheet.)
Figure 7G Vaporizer Mounting Bracket
Figure 7H Vaporizer Mounting Bracket
NOTE: There are various specific lengths of pipe that must be cut and threaded for all installations
depending on how the pipe train has been installed and how the piping comes through the screen
window for its vertical run down the dryer.