Grain Systems Bin Accessories PNEG-318 User Manual
Page 16
![background image](/manuals/277559/16/background.png)
2. General Foundation Requirements for GSI Bins
16
PNEG-318 Concrete Foundation Recommendations for GSI Grain Bins
Outside Bin Hold-Down Details (Unstiffened 4.00" Corrugation)
Figure 2K Single Anchor Bolt
Figure 2L U-Bolt/J-Bolt Combination
Outside bin hold-downs should be used on all non-stiffened GSI bins. When anchoring the bin, be sure
the vertical seams of the bin align with the U-bolts in the foundation. They may be anchored to the
foundation using either the U-bolt and J-bolt combination or the single anchor bolt, except on 42' diameter
and larger bins and bins 10 rings tall.
NOTE: All non-stiffened 42' and larger bins and bins 10 rings tall should use single anchor bolts, not the
U-bolt/J-bolt combination. (Double U-bolt/J-bolt may be used on non-stiffened 42' and larger bins,
no greater than 9 rings tall as an option.)