Grain Systems Tanks PNEG-4030 - Manual (Page 42)

6. Stiffeners
42 PNEG-4030 40 Series 27' and 30' Diameter Bins
Base Boots
Use the following information to determine the differences between the base boots. (See Figure 6E.)
Figure 6E Images of the Base Boots
Ref # Part # Description Height Base Plate Size
A CTS–2121XX
Base Boot Weldment for 16 Through
9 Gauge Base Stiffeners
11.391" (29 cm)
6" x 9" x 3/8"
(15 cm x 23 cm x 0.95 cm)
B CTS-2110XX
Base Boot Weldment for 8 Through a
Laminated 2 Gauge with an 11 Gauge Insert
11.391" (29 cm)
6" x 9" x 3/4"
(15 cm x 23 cm x 1.90 cm)
C CTS-2109XX
Base Boot for 2 Gauge Laminated Base
Stiffeners with Inserts from 10 Through 2 Gauges
11.391" (29 cm)
8" x 10" x 3/4"
(20 cm x 25 cm x 1.90 cm)
D CTS-2131XX
Base boot Weldment for 2+8 to
2+2 Base Stiffeners
11.391" (29 cm)
8" x 10" x 1-1/2"
(20 cm x 25 cm x 3.81 cm)